Einleitung

  1. nClfvNwnGDHKIsJq
    nClfvNwnGDHKIsJq
    aflA2NnWZUL3kSEb
    NmuohxlS5AepQZmZ
    • Push in the button next to the lens.

    • While holding the button twist the lens counter-clockwise.

    • Pull up and remove lens from camera.

  2. fBF6XqAa6oXhPcQd
    fBF6XqAa6oXhPcQd
    NYF6Fo1sYs2byCgi
    QaXd24EtVAxexlUV
    • Inside toward the top you will find a small slit in the plastic piece.

    • Insert a flat head screw driver into the slit and pull down to access the focus lens.

  3. PLQlcbZLRRqkiX2t
    PLQlcbZLRRqkiX2t
    MBITRS3R1pX2eKHL
    h4GsrHf4ql1WTPKh
    • Using tweezers grab the focus lens on the side by the two tabs that are on it.

    • Do not grab the focus lens in the middle as this will damage the lens.

    • Pull out and remove focus lens from camera.

  4. 4pbP3evidoMhjwHH
    4pbP3evidoMhjwHH
    uQoYZqnCnLeOyJ5L
    FoaAMVOvAUWUcRZl
    • When inserting new focus make sure to orient it where the two tabs are facing towards you with the smaller tab facing up.

    • Angle the focus lens to make installation easier.

    • Lay the new focus lens into the plastic tray.

    • It does not snap into place.

  5. v1vZxMQZtaWNmt4d
    v1vZxMQZtaWNmt4d
    otwb4An6iKTkXShm
    • Insert screw driver into the slit and push up to close.

    • You can also use your thumb, if you are careful not to touch the lens as this could leave a smudge on the lens.

    • You will hear a click when the plastic tray is back in place.

  6. NJkaTVhaHQDfCMQm
    NJkaTVhaHQDfCMQm
    PAlurADSoO2gbgRX
    • When re-installing the lens line up the orange dots that are one both lens and camera.

    • Fit lens into place and turn clockwise to secure it back to camera.

Abschluss

You have now completed a focus lens replacement.

Walter Littlefield

Mitglied seit: 21/03/18

265 Reputation

0 Kommentare