Einleitung
This guide will help you remove the outer cover of your Sony BDP-BX510 so that you can start the replacement steps in the other guides.
Werkzeuge
-
-
To remove the tray cover, hold both sides of the tray cover and gently apply a downward pressure.
-
Apply slightly more pressure to the left side until it unhooks then unhook the right side.
-
Close the disk tray by pressing the eject button again, then power off the device and unplug it.
-
-
-
Turn to the back of the device.
-
Remove the two 7mm Phillips #2 screws.
-
Slide the two plastic covers on both sides of the device towards the back of the device to remove them.
-
-
-
Turn the device so you can see the bottom.
-
Unclip the three black plastic clips on the bottom of the device.
-
Unclip one clip on each side of the device.
-
To reassemble your device, follow these instructions in reverse order.
