Einleitung
This guide requires only simple tools, like a screwdriver and metal spudger. Be careful when handling circuit boards to ensure the device does not become further damaged.
Werkzeuge
-
-
Plug in the Blu-Ray player, then press the power button, making sure the Blu-Ray player is powered on.
-
Press the eject button on either the top of the Blu-Ray player or on the remote to open the disc tray.
-
-
-
Grab the sides of the disc tray cover and carefully pull each side upwards, starting with the left side. This will unhook the cover from the tray.
-
-
-
Insert the nylon or metal spudger under the clip on the side near the front of the device. Lift the clip so it is free from the device.
-
-
-
Flip device over so the bottom faces you.
-
Insert the nylon or metal spudger and lift the two clips on the bottom of the device.
-
-
-
Locate the large ribbon cable connecting the port board to the motherboard.
-
Detach the cable from the motherboard by carefully pulling upward on the cable.
-
-
-
Using the Phillips #2 screwdriver, unscrew the silver, 8mm screw holding the board in place.
-
-
-
Using the nylon or metal spudger, carefully unclip the port board from the side of the player.
-
To reassemble your device, follow these instructions in reverse order.
