Einleitung

In this guide you will learn how to remove the disk drive from a Sony BDP-BX620.

  1. DGIIZdiPsirN3LgZ
    DGIIZdiPsirN3LgZ
    KycfRCd3gnL6UPAd
    • Power on the device, eject the disk tray, and power off the device.

    • Turn the device over.

    • Lightly apply downward pressure on the black covering on the disk tray until it comes off.

    • Caution, applying too much pressure can break the black covering.

  2. u6XnIB1vpjPxFkji
    u6XnIB1vpjPxFkji
    lvSVqZjCYbot3d2T
    • Turn the device around.

    • Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.

    • Slide the side covers on either side towards the back of the device.

    • There is a back cover on either side of the device.

  3. BblxjTDi6F4ioQ3K
    BblxjTDi6F4ioQ3K
    2SnYh6J3UjHiVSsY
    ydMqiZ6awnulgHRm
    • This step might require someone to help unclasping the plastic clips.

    • Turn the device so that the bottom is facing up.

    • In the bottom, unclip the three plastic clips circled in red.

    • On either side, unclip the plastic clip circled in red

    • Slide the black covering forwards to remove.

    • All five clips have to be unclasped for the covering to be removed.

    • Careful not to break the plastic clips when putting it back on.

  4. HnLGdkGFOJa1xVRh
    • Remove the no-fuss ribbon cable connectors by gently pulling on them.

    • Pulling harshly may break the flat cables.

  5. uTvrYMaWvPqDNiup
    • Using the Phillips screw driver, remove the three screws.

  6. 6kIeL4pSnS5MDESI
    6kIeL4pSnS5MDESI
    qy1hPD5NMELJ5Zhs
    • Turn the device over and use tweezers to push the metal clasp until it comes off.

    • Lift the metal brace located over the disk drive and remove the disk drive and the metal brace.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Axel Cruz Jimenez

Mitglied seit: 05/10/16

207 Reputation

0 Kommentare