Einleitung
Take off the side panels, top panel, and two metal supports. Once done, you have access to the inside of the device. This guide is just a lot of unscrewing!
Werkzeuge
-
-
Remove the 12mm screws with the Philips #2 screwdriver which keep the plastic panels in place.
-
Don't forget, there are two more 12mm screws on the other side as well.
-
-
-
First, remove the three 12mm black screws holding the top panel on (Phillips #2).
-
Then, remove the two 12mm black screws - one on each side of the back of the device - holding the top panel on.
-
Lastly, remove the three 12mm black screws on each side of device.
-
-
-
After gently disconnecting the two ribbon cables (you can just pull them out with your hand), take the top off and set it to the side.
-
-
-
After the top is off, you'll see that there are two metal bars that go across the top of the device.
-
Remove each bar by unscrewing the two 10mm silver screws on each end.
-
To reassemble your device, follow these instructions in reverse order.
