Einleitung

You can use this guide to replace the disk drive in the Sony BDP S3500. It is a fairly easy process and won’t require many tools or a lot of prior experience.

Be sure to review the troubleshooting guide, as most of the time the problems are due to malfunctioning software rather than it being a hardware issue.

This guide will show you how to safely disassemble the device by removing the required parts and connections so that the disk drive can be replaced without damaging any of the other components.

  1. gYlphtLsKtUnINul
    gYlphtLsKtUnINul
    2sBRIyKYDPCZqrj6
    • Use the Phillips #2 screwdriver to remove the two 9mm screws located on the back of the device.

  2. Ho4rFKkCmBKVuglb
    • Slide the top panel off towards the back of the device.

    • Remove the top panel.

  3. 1gXMPgLVyq2LmBi6
    1gXMPgLVyq2LmBi6
    V1yGnTlWh5mGdRmY
    • Unclip the plastic tags from the bottom of the device.

    • Unclip the plastic tags from the sides of the device.

    • Slide the front panel off.

  4. wUZc1KJLODTZe4oD
    wUZc1KJLODTZe4oD
    FFF2dcREVB3Yjvqf
    • Remove the three ribbon cables by gently pulling the cables out of each connector.

    • Be sure to only handle the circuit board from the edges so that the PCB is not damaged.

  5. CEpCYMrJEWyI6poj
    CEpCYMrJEWyI6poj
    nyYpkuAyEEiUelfr
    • Use a Phillips #2 screwdriver to remove the two 9mm screws that are holding the disk drive in place.

  6. ZUDcV24GZXOnxFMD
    ZUDcV24GZXOnxFMD
    whmIMHGexUdaPCXL
    • Carefully lift and slide the disk drive out of the casing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

V W

Mitglied seit: 22/01/20

197 Reputation

Ein Kommentar

Hello, great guide thank you. How do you go about finding the correct replacement drive?

Andy Day -