Sony Cyber-shot DSC-HX300 Motherboard Replacement

Geschrieben von: Elizabeth Surface

Kommentare: 4

Sony Cyber-shot DSC-HX300 Motherboard Replacement

Schwierigkeitsgrad

Difficult

Schritte

Zeitaufwand

30 Minuten - 1 Stunde

Einleitung

If the Sony Cyber-shot DSC-HX300 is failing to power, while it has a full battery and the LCD screen works, then it is possible that the motherboard has gone out and needs to be replaced.

Werkzeuge

Schritt 1

Make sure the camera is powered off
Turn the camera upside down. This is a view of the bottom of the camera.

Schritt 2

Push battery cover away from the camera.

Schritt 3

Push the blue tab that secures the battery. The battery will then spring out.

Schritt 4

Remove the battery.

Schritt 5

Make sure to remove the battery before disassembly to prevent electrocution.
Remove the 3 (4 cm) Phillips head screws located on the back of the camera.
Remove the 2 (4 cm) Phillips head screws on the right side of the camera.
Turn the camera upside down to remove the remaining the 3 (4 cm) Phillips head screws holding the plastic camera housing together.

Schritt 6

Using a plastic opening tool, separate the plastic camera housing.

Schritt 7

Disconnect the ribbon wire attaching the screen to the camera.

Schritt 8

Carefully remove the 7 ribbon wires connected to the mother board.
Remove the 2 (5 cm) Phillips head screws on the speaker mounting bracket.
Remove the 3 (4 cm) Phillips head screws that secure the motherboard to the camera.
Lift up on the speaker mounting bracket to remove it.

Schritt 9

Carefully disconnect the ribbon wire connecting the HDMI port to the Motherboard.
Once the Motherboard is removed the replacement can be installed.

Would you know how do I remove the lens parts? My zoom is broken and I can find new parts on ebay, but I don't know how to remove and replace it. Thanks!

flaviowolff - 09/03/17