Sony Cyber-shot DSC-P100 Camera Flash Replacement

Geschrieben von: Katie McCraw
  • Kommentare: 2
Sony Cyber-shot DSC-P100 Camera Flash Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

This is a step-by-step guide to disassembling and replacing the flash in the Sony Cyber-shot camera.

  1. ZJflBPTMEqyWujYq
    ZJflBPTMEqyWujYq
    WGWlAsdl6Ix5Osy1
    VHibyyCUfTNDKhNR

    • First locate the appropriate screws for detachment.

    Hi, is this fórum working yet?

    I need tô replace my Sony P100 infernal batery.

    Leonardo -

  2. m5M5VL1iXmIbr53V

    • Remove the five screws shown using a Phillips #00 Screwdriver.

    • It is important to put the small screws in a safe location in order to reassemble the casing.

  3. TJ5tAxZiLRaxmETX

    • Using a spudger, carefully pry open the front casing.

  4. gMXKvZEWfr2mb24g
    gMXKvZEWfr2mb24g
    AH6CIFSsfKAb2QkL

    • Carefully separate the front casing from the camera body.

    • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

  5. CHQ3DSS3xqh1ajCW
    CHQ3DSS3xqh1ajCW
    HCZIxTpHc4YwwH41

    • Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

  6. 5ZGwXm6OpZhf1YbL
    5ZGwXm6OpZhf1YbL
    OqDhPLKDuKZsORNX
    yGouhAKgWK6eTIZO

    • Using a spudger, pry the small latch between the lens and the flash open to release the flash.

    • Pull the flash away from the camera.

    Need help tô replace my old p100 internal batery

    Leonardo -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Katie McCraw

Mitglied seit: 09/03/12

191 Reputation

0 Kommentare