Einleitung
This guide will allow the user to take off the front cover of the camera.
Werkzeuge
-
-
The battery compartment is located on the bottom of camera.
-
Move the slider from the 'lock' position to the 'open' position.
-
-
-
Pull battery from compartment.
-
Insert newly charged battery into compartment, as shown in diagram (located in compartment).
-
Shut compartment door.
-
Move the slider back to the 'lock' position.
-
-
-
Use the Phillips #00 screwdriver to remove the 4mm length screws. There are 6 screws total.
-
-
-
The 4 mm length screws are located on each side and on the bottom of the camera.
-
2 screws on each side (4 total).
-
2 screws on bottom.
-
-
-
Gently pry around the front cover using the plastic opening tool.
-
Carefully separate front cover from body of camera.
-
To reassemble your device, follow these instructions in reverse order.
