Einleitung

We are going to explain the steps needed and what is necessary in order to replace a broken front cover for this camera.

  1. OeOXUuegDnlpQYYU
    OeOXUuegDnlpQYYU
    K2QmUID6hZhmvwNn
    • Slide the battery cover in the direction the arrow points.

    • Pull the battery cover towards you.

  2. YPALxLt51biBUMaF
    YPALxLt51biBUMaF
    v2ljpSKiXXTqWEGp
    • Flick the blue switch for the battery to pop out.

    • Remove the battery from the camera.

  3. yZbsrf1Vw1pAcYqk
    yZbsrf1Vw1pAcYqk
    4VZJi3tjuPJwrRKR
    • Using the Phillips #00 Screwdriver, remove the two screws from the caution panel.

    • Remove that panel.

    • Careful for falling pieces.

  4. vVEOf2H1HepRjSuM
    vVEOf2H1HepRjSuM
    wdVAJgbiKpfNEmff
    • Remove the screw with a Phillips #00 screwdriver from the right side of the camera (with '3x optical zoom' engraved on the side panel).

    • Remove that panel.

  5. Yy6mpUjcegpkjWSJ
    • Remove the screw using the Phillips #00 screwdriver from the bottom of the camera, closest to the back cover.

  6. GYSnrO3p2jHl2fHG
    GYSnrO3p2jHl2fHG
    C4TE6oIpiylqmqPO
    • Gently remove the back cover.

    • It may be a bit stiff, so use some force to remove it. Proceed with caution.

    Muchas gracias, muy claro!!

    Ruben -

  7. qO4YkrLYebcaKbJk
    • Remove the screw using a Phillips #00 screwdriver on the left side (where the "3x optical zoom" panel use to be).

  8. rloynaonOrY5MZCq
    rloynaonOrY5MZCq
    GArHOYsPH6QZujSr
    HMAYoX3eXbyToZTg
    • Remove the small screw using a Phillips #00 screwdriver on the bottom of the camera attached to the front cover.

    • Gently remove the front cover.

    • Put a little force to pop off the case. Proceed with caution.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andrew Carter

Mitglied seit: 11/10/10

196 Reputation

0 Kommentare