Einleitung
Some things to consider before you work on the Sony Cyber-shot DSC W800 to replace the Button Board:
- The Button Board is an integral part of the device and any improper handling can cause issues in other parts of the camera.
- Be cautious when removing ribbon wires.
- Be sure to keep track of all pieces that are taken apart.
Werkzeuge
-
-
Using the Spudger, remove the back panel from the device.
-
The loose piece circled in the picture will most likely fall off the camera housing.
-
-
-
Remove the two 2.15mm Phillips #000 screws from the circuit board.
-
Gently pull on the ribbon wire from ZIF connector with the tweezers to remove the button board.
-
To reassemble your device, follow these instructions in reverse order.
4 Kommentare
Thanks for this - was spot on and allowed me to easily fix the problem I was experiencing!
follow the step camera button loosen a bit unstuck but camera still stock on language setting and do not budge
follow the step the button are unstuck but the camera display still stock on language setting