Sony DVP-FX730 Cover Replacement

Geschrieben von: Rogelio Garcia
  • Kommentare: 0
Sony DVP-FX730 Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

To access the internals of the Sony DVP-FX730, the cover must be removed. If there is a problem with one of the components on the cover, it may need to be replaced. A screwdriver should be used to remove screws and rubber feet to remove the cover successfully.

  1. MxZBHasVeyxTJBYL

    • Remove the five exposed 7.9 mm screws using a Phillips screwdriver.

    • Punch through the warranty sticker with the spudger.

    • Remove the screw underneath with the Phillips screwdriver.

  2. lZxjSvCoWm2XFKOm

    • Remove the rubber feet using the spudger.

    • Remove the screws that were covered by the rubber feet.

  3. AVWgyiIjyeEQDVBr

    • Hold on to the corners of the cover and gently lift the cover.

    • The tray is still connected to the base with wires.

  4. 2xUjXfWDYcJUr3UG

    • Gently remove the wires with tweezers by pulling up on the base they are attached to.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Rogelio Garcia

Mitglied seit: 20/01/12

16 Reputation

0 Kommentare