Einleitung

This guide provides instruction for installing a back case for the Sony Ericsson TM506 cell phone.

  1. kJQJam6hBGEPUyXY
    kJQJam6hBGEPUyXY
    aMvyaIKwQJ4nJGiE
    Mmn4PhtHtsDOclWR
    • Firmly hold the phone between your fingers with your thumb on the battery cover.

    • Push down with your thumb until the battery cover comes off.

  2. xEsvegUtiQoP2rwx
    xEsvegUtiQoP2rwx
    LKK6fkr3iJKal1fe
    N2rNHXAoZqH3dU6A
    • Unscrew the bottom two 5.4mm screws with a Torx T6 screwdriver.

  3. dJjlF2beeRJhNEgg
    dJjlF2beeRJhNEgg
    VpCOksk2AMQrUdRJ
    • Remove the two rubber casings for the top two screws with a plastic opening tool.

  4. hMQHbbPurExHykxZ
    • Unscrew these two 5.4mm screws with a Torx T6 screwdriver.

  5. NWVovgAm1wxpYPAo
    NWVovgAm1wxpYPAo
    xsigQPE1PMpYoc2p
    epDKrHn5E4rhJb3S
    • There are eight snap hooks located around the outer case. Carefully snap these to remove the outer case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Minnal

Mitglied seit: 09/07/12

25 Reputation

0 Kommentare