Einleitung

Removing the lens mount is a quick process that is fully outlined by this guide.

  1. XSFK5RKAgikSf5tE
    XSFK5RKAgikSf5tE
    1tOeFGAJ3nbtIFb3
    • We need to turn off the camera because we are removing components that could get damaged if the power is still on.

    • If the camera is on, rotate the power switch on top of the camera counterclockwise to turn the camera off.

  2. ULc4kmJXYW5bX3hl
    • Flip the camera over such that the power switch points down.

    • Slide the switch on the bottom of the camera grip towards the lens to open the battery door.

  3. O6JQtslBb6G2NXaf
    • With the battery door open, push the blue lever in the battery compartment to release the battery.

  4. WEWySbDTVbFXMfhq
    • To the left of the battery compartment, the SD card needs to be pushed down slightly with your fingers, which will cause the card to eject.

    • Pull the card out with your fingers.

  5. EZYhuufm64gMYiRP
    EZYhuufm64gMYiRP
    xpkE4FigsmJfIDKa
    • First, turn the camera upside down.

    • Press the button located next to silver lens mount and rotate the lens counterclockwise.

    • Pull the lens away from the camera body.

    • After removing the lens, replace the lens or attach the body cap as soon as possible to prevent damage to the shutter.

  6. ADZHLgPevatWPlgJ
    • With the front of the camera facing you, remove the four silver #00 Phillips screws from the metal lens mount.

  7. wIiZRcjcGrEbikcL
    • Remove these three layers from the lens mount with your finger or by turning the camera face down.

  8. KQQXKNYbflQrtnqH
    • Remove the two newly visible #00 screws within the metal ring.

  9. 6XBbn2WatIFfNAB5
    • Remove the final metal ring from the mount.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jay Miley

Mitglied seit: 22/04/14

4880 Reputation

0 Kommentare