Einleitung

Common reasons for replacing the keyboard are: keys stuck or not registering, the keyboard is cracked, or the is keyboard grimy beyond cleaning.

In this guide, you will learn how to replace the keyboard for your device. Please remember to unplug the charging cable, since it could result in electric shock.

  1. oWQywlrepD4rxPfE
    • Turn off the computer and disconnect the charging cable.

    • Failing to unplug the cable can result in electric shock.

  2. nfXDAtfmlXBRCFPQ
    nfXDAtfmlXBRCFPQ
    dYJTWGNWLS1rGxmY
    • Slide battery release toggle switch towards the "RELEASE" print.

  3. 1cwiW4kvQaZn2FJV
    1cwiW4kvQaZn2FJV
    iQ1MLyxJDMkGDSmL
    avFdUuZWhx22QKx4
    • Apply pressure with your thumb on the grip.

    • Pull the battery out while simultaneously holding the battery release toggle switch in the release position.

  4. O6NAsxNN5McKjwC5
    O6NAsxNN5McKjwC5
    pBPrwBJqZPSLJ16V
    • Remove one 5 mm Phillips #1 pan head screw, in the middle of the laptop, using a Bit Driver with Phillips PH1 bit.

  5. 3xreYHKBPi5ThLT2
    3xreYHKBPi5ThLT2
    LUhZXIhKjFSoqbi4
    • Be sure to pry the plastic opening tool under the keyboard, rather than under the keys. Otherwise, some keys could get harmed.

    • While using a plastic opening tool, carefully lift the keyboard by inserting the tool under the edge.

  6. DIXfUAQmqOZbOoco
    DIXfUAQmqOZbOoco
    v3ZqOaGKnx4pQiCn
    ZOahoqoF2GaQFNQX
    • Do not pull the keyboard too far away, as a ribbon cable is still attached. Failing to do so can cause damage to the ribbon cable or the connector.

    • Use the plastic opening tool to release the clamp.

    • Using slight pressure, remove the ribbon cable with your fingers.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cole Collins

Mitglied seit: 04/10/16

163 Reputation

0 Kommentare