Einleitung
-
-
Tools you will need is the Phillips #00 precision screwdriver, Plastic Opening Tools, and tweezers.
-
Insert plastic opening tool in the corner of device and slide along edges to separate adhesive.
-
Remove cover
-
-
-
Remove tape connecting front camera to motherboard and then disconnect the camera from the port.
-
Lift the camera from the right and simply wiggle out of the slot.
-
-
-
Disconnect the back camera from the port located in the upper right corner.
-
Lift up the camera cable using the tweezers.
-
Wiggle out camera from the slot.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
