Sony a7 Rear Disassembly Replacement

Geschrieben von: Jeffrey Coleman
  • Kommentare: 1
Sony a7 Rear Disassembly Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

10 - 15 Minuten

Einleitung

This is a pre-requisite list of steps that will act as a placeholder for all other applicable guides pertaining to the Sony a7.

  1. Vo5kpt6JMq2LPxeS

    • Remove the eyepiece cover by removing the four M1.5x4mm screws with a PH00 Phillips screwdriver.

    • Remove the M1.5x4mm screw that retains the adjustment wheel with a PH00 Phillips screwdriver.

  2. vLU12CluQWT5CiiW
    vLU12CluQWT5CiiW
    WRObwWOsl1OtLHOw
    CndfKhR1qoeiIAbe

    • Remove the six M1.5x4mm screws with a PH00 Phillips screwdriver.

  3. fijRKykyyhiKUryR

    • Remove one M1.5x4mm screw with a PH00 Phillips screwdriver.

  4. lpO6PICe6Mqp3joc
    lpO6PICe6Mqp3joc
    VKbQSAnxtfyVBCyQ

    • Remove the four M 1.5x2mm screws.

  5. LHfc15wR2yRNDcaG
    LHfc15wR2yRNDcaG
    peWocfUqirjJq36y
    4HYctUkQSjCvpJQS

    • Once the screws have been removed, unsnap and lift the rear plastic cover off of the camera.

  6. FjCXMIDqKyCVNCGv

    • Using the blunt tweezers, remove the blue ribbon cable.

    • For additional guidance and tips on how to properly attach and detach connector cables, please reference iFixit's guide to connector cables here.

  7. nHeB4LAGHBJHafEX
    nHeB4LAGHBJHafEX
    qIoyyCJ6SElaBAWc

    • Place the tweezers on the side of the circuit board and lift it from underneath so as to free it from the three retaining tabs.

  8. ihZrHTBrpVKFnMgI
    ihZrHTBrpVKFnMgI
    qrVFRXZ3KNlDWiCx
    t46EKojOlK3CWO1g

    • Remove four M1.5x4mm screws using a PH00 Phillips screwdriver.

    On my A7 the screw shown first top right was a different thread to the other three, take care to put back in the correct place

    David Zhecheva-Hamilton -

  9. rtdHGSIP4H4w42SK

    • Lift the metal plate and LCD screen away from the camera body.

  10. jqcA42SOVEW5xH4s

    • Detach the amber ribbon cable from the motherboard.

    • For additional guidance and tips on how to properly attach and detach connector cables, please reference iFixit's guide to connector cables here.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jeffrey Coleman

Mitglied seit: 14/01/20

1226 Reputation

0 Kommentare