SteelSeries Arctis Pro Plus GameDAC Headset Circuit Board Replacement

Geschrieben von: Kyle Chang
  • Kommentare: 5
SteelSeries Arctis Pro Plus GameDAC Headset Circuit Board Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

20 - 30 Minuten

Einleitung

Follow this guide to access and remove the main circuit board from the headset housing.

  1. sDeg65jlUQtc4BU2
    sDeg65jlUQtc4BU2
    HVVlMrnnvsoblBNG

    • Lift the edge of the cushion and pull out slightly.

    • Work your way around the cushion until it comes off completely.

    • Repeat for the other cushion.

    I do not believe that my Arctis 7 uses Phillips #0 it looks to be some kind of tamper proof start bit, do you know what kind that would be?

    Jerrett Smith -

  2. 2CAPVHviF3OHHUKT

    • Remove the three 5mm screws with a Phillips #0 driver head on the headphone with the microphone.

    Philips #0 doesn’t work, it’s using a weird screw head

    Mojo -

  3. m13FTVZE5LlIfIfI

    • Lift the speaker off the headset to expose the circuit board.

    • Be careful not to lift the speaker too quickly or too forcefully to prevent the wires from being pulled out of their connections.

  4. QrMSlgKMI2URX4KQ

    • Remove the three 5mm screws using a Phillips #0 driver head.

  5. lSZq2UG6PIlBJBXL

    • Lift the circuit board out of the plastic housing.

    • Press in on the volume wheel while pulling on the circuit board to help maneuver the circuit board out of the housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Kyle Chang

Mitglied seit: 24/01/19

1124 Reputation

3 Kommentare

any idea where i can buy the circuit parts to both side?

erminio santiago -

any idea where i can buy Circuit Board Replacement for both side? please

erminio santiago -

What's the problem that requires circuit board replacement? My left speaker doesn't work checked and all wires connected. Wondering if the circuit board fixes that

bayarea_rooter -