Einleitung
Does your surfboard have a broken or loose fin? This guide will help you replace your futures surfboard fin to get you back on the water in no time!
Werkzeuge
Ersatzteile
-
-
Lay your surfboard down on a flat, durable surface long enough to support the length of your board.
-
-
-
Make sure the small screw hole in front of the fin is free of debris and sand.
-
Insert the key into the hole and begin turning counter-clockwise to loosen the screw inside.
-
-
-
Firmly grasp the fin with one hand and place your other hand on the surfboard for stabilization.
-
Simultaneously lift the fin while tilting it backwards to remove the fin.
-
-
-
With your new or repaired fin, insert the back in first so that you feel the inlet on the fin clip into the little rod in the slit.
-
Once you feel the back secure, bring the front of the fin down into the slit.
-
-
-
Place the screw back into the hole and begin turning clockwise using the key.
-
Continue turning until the screw is tight and won't turn any more.
-
-
-
Wiggle your fin gently to test for looseness, and you have successfully replaced your surfboard fin.
-
