Einleitung
This guide will provide instructions on how to replace the camera on your Swann Doorphone Video Intercom to ensure the image appears clear on your LCD monitor.
Werkzeuge
-
-
Flip the outdoor camera over so that the underside is facing up.
-
Remove the back cover by grabbing the sides of the camera and pulling towards your body.
-
-
-
With the back cover of the outdoor camera off, press the first gray button, with blue wire underneath, down as shown in the picture.
-
While pressing the gray square button, remove the blue wire from the first opening under the button.
-
-
-
Remove the other wires using the same steps as the blue wire.
-
Using the JIS #0 screwdriver, remove the 2mm screws from the back plate.
-
Remove the back plate by pulling the plate away from the device.
-
-
-
Using one of the tweezers from the Precision Tweezers Set, gently place them around the wire connector attached to the camera.
-
Pull slowly in the direction of the cables until the connector is no longer attached.
-
To reassemble your device, follow these instructions in reverse order.
10 Kommentare
آیفون تصویری
مانیتور آیفون تصویری حافظه دار