Einleitung

For this repair you will be removing your old grip and replacing it with a new Replacement Grip that you purchased from a sports store. This guide will also explain how to apply an Overgrip that you may have purchased for a variety of reasons: disliking the texture of the replacement grip, feeling you want a thicker grip, or simply wish to protect the more expensive Replacement Grip.

  1. W2yCIhBIENyEy4nZ
    W2yCIhBIENyEy4nZ
    WnZNfuZF2tIKGVwH
    • Pull the rubber collar towards the tennis racquet head off the handle.

  2. YWgkjUUqgOFNSmr1
    • Unwrap the tape on the tennis racquet handle top.

  3. LfwmwVDbl5YJ3OLZ
    LfwmwVDbl5YJ3OLZ
    NeqXYQMvLdQ3JI1b
    aEyiYJ14wOEhfqfW
    • Remove the old grip.

    • Some older tennis racquets may have a few staples holding the grip to the buttcap. Use the staple remover to take them out.

  4. 2vGXT1W6CuFaZKQb
    • Peel off 6 inches of the paper backing covering the adhesive from the replacement grip.

  5. lXDkgfh2D6BLTF5P
    lXDkgfh2D6BLTF5P
    14y4dMw36UFOZoV2
    • Face the racquet so the buttcap is towards you.

    • If you are left-handed, wrap the tape towards the right. This method is what is used in the photos.

    • If you are right-handed, wrap the tape towards the left

    • Wrap the grip flush with the buttcap base.

  6. sUWw6C52F34bmTPu
    sUWw6C52F34bmTPu
    CFeoCy1aseRtHSBU
    • Wrap the handle at a steady incline, peeling off the backing 6 inches at a time.

    • Stop wrapping just before you finish wrapping the handle.

    • The handle is the off color or unpainted portion below the tennis racquet head.

  7. lvIWKIKULBbvBGFc
    lvIWKIKULBbvBGFc
    BnEbBkVIwpEVGVIs
    • Wrap the handle top with the backing on.

    • Mark a horizontal line parallel to the buttcap around the grip.

  8. NyXhlOOErY2Yyv4S
    • Cut along the marked line using either scissors or a knife.

    • Cutting with scissors is significantly easier, however if you do not have scissors that can cut the grip, a knife will work.

  9. b4i4NDANdwKFNrjl
    • Remove the backing and finish wrapping the replacement grip.

  10. OUSI1OHAo4VLxuJx
    • Wrap the tape that comes with the grip around the handle halfway on the racquet and halfway on the grip.

  11. VLslNuJncwlE6Hc6
    VLslNuJncwlE6Hc6
    46HLUSkIlZrVkYTm
    • Complete your fix by pulling the rubber collar back to its original location.

    • If you do not wish to add an overgrip, skip step 12.

  12. tWMM1C1xUBVLZMD3
    • Pull the collar up off the handle.

    • Repeat steps 4 - 11 to apply the overgrip.

    I wrote a bout this but you just hit the nail! Thanks for sharing … The Best Way to Regrip a Tennis Racquet

    Paul Mwanyasi -

Abschluss

Congratulations, your racquet grip is now fixed and you can go out and continue playing!

Aisleen Santos

Mitglied seit: 28/04/17

196 Reputation

4 Kommentare

Thank you I’ve found particularly useful the, then obvious when you think about it, comment that left handed setup is different to the right handed one!

Sam Curti -

now this was helpfull, What's the difference between Eastern grip and Continental grip? Are they basically the same grip?

JACKSON RYAN -

This guide about tennis grip was worth reading and helped to develop my skills to the next level.

Tennis Unit -

I use this tennis guide, it’s quite worthy.

Rondaromero -