Texas Instruments TI-83 Plus Keyboard Mat Replacement

Geschrieben von: corey
  • Kommentare: 0
Texas Instruments TI-83 Plus Keyboard Mat Replacement

Schwierigkeitsgrad

Easy

Schritte

9

Zeitaufwand

5 Minuten

Einleitung

The keyboard mat is what makes contacts with the motherboard. If the keys are not working very well then the mat may need replacing.

Werkzeuge

  1. SuujAuAvR1YAwQk2
    SuujAuAvR1YAwQk2
    PMoM5h36vB4tTHNv

    • Remove the battery cover.

    • Remove the AAA batteries from the calculator.

  2. UusD1DCUSQ1FZSQP

    • Remove the 5mm Philips #00 screw holding backup battery cover.

    • Remove the backup battery cover.

  3. eONGX5ZFVR2H2ZQL

    • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

    • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

  4. aQByrZp2XLOgqX2Q

    • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

  5. XMwcCPcgMceUKZnh
    XMwcCPcgMceUKZnh
    sNyB5ROHylkZxMBH

    • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

  6. AUFjUHoQ5MEULhMV
    AUFjUHoQ5MEULhMV
    k2inRKqf1QdqcvdS

    • Keep the screen face-down during this step. Only the motherboard is attached to the face-plate and the screen may fall out.

    • Remove the eight (8) 5mm Philips #00 screws on the motherboard.

  7. RF5hoXlls2PCcRDR
    RF5hoXlls2PCcRDR
    4GrmgyZJvkKrQYmj

    • Carefully remove the motherboard and screen. Grab the board by its side with one hand and the screen with the other. Carefully lift the two parts up.

    • Keep the face-plate face-down to prevent the keys from falling out.

  8. CUiAqfF6uk2FkCBM
    CUiAqfF6uk2FkCBM
    aJAwwCOFNf5AQZHG

    • Remove light gray rubber keyboard mat.

    • Keep your calculator face down to ensure the individual keys do not fall out.

  9. 1JoyUfXuQxOCckFu

    • Clean the contacts on the keyboard with a soft cloth.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

corey

Mitglied seit: 02/10/12

11 Reputation

0 Kommentare