TomTom VIA 1605TM Motherboard Replacement

Geschrieben von: Tyler Wade
  • Kommentare: 3
TomTom VIA 1605TM Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

Keine Schätzung

Einleitung

GPS dropped and could damaged components. Replacement of the motherboard is needed in order for the device to properly function. When prying do not use metal tools as this can cause static damage. The device can be identified by its model number which is located under the small panel on the bottom of the device.

  1. pqFDuSZP1FYfwXEv
    pqFDuSZP1FYfwXEv
    EkNUCvCiRPaRGNDO
    FSLV6bqRdakFXBA1

    • Locate the round suction cup on the back of the device.

    • Twist the suction cup clockwise or counterclockwise while pulling back away from the device closer to your body until removed.

    • When reassembling twist the suction cup but, push in as oppose to pulling out.

  2. DDIaYt3aoAY1UAGJ

    • Location of screw is where the suction cup was.

    • Insert 8mm Hex #T6 screw driver into screw.

    • Unscrew in counter clockwise direction.

    • When reassembling screw in the clockwise direction.

  3. 6hmCOrAuvwQYfTSk
    6hmCOrAuvwQYfTSk
    hsOpGHepfC6KBIer

    • Pry along the edges with the plastic opening tool to separate the back and front panel.

    • Try not to tear the screen open as you may break the part. Go about this gently but with enough force to remove the screen.

    My 1605M has the touch screen attached by a 4 conductor ribbon cable, making the job much more complicated than depicted in this guide.

    Paul Stahman -

  4. DRIGOmLEGRHlVdwb
    DRIGOmLEGRHlVdwb
    N2fHhJwQaGwpuOo2
    I614xuNkRGp5owxa

    • Place the new front panel (with new screen) on to the back panel. Press firmly along the edges to attach.

    • Only do this step of placing the front panel on if you are completed. If there are still components needed replacing postpone this step until the end.

  5. PA6lDUrm6oa1n43n
    PA6lDUrm6oa1n43n
    6krtblHGNfRNbZQa
    MuYjnVKFZoDmsD1J

    • Keep the TOMTOM oriented so the curve is on the bottom. Locate the four 1mm Philips #J1 head screws attached to the motherboard.

    • Unscrew each of these in a counter clockwise direction.

    • When reassembling screw back in a clockwise direction.

    • The second picture is to represent where the four screws are located. The LCD screen does not disconnect from the motherboard until the next step.

  6. NX3GIPL24WZVSYda
    NX3GIPL24WZVSYda
    6kfEic3f3rIS21fO
    tqYSLivRcWHflurZ

    • Remove the Blue Ribbon Cable by pushing each side of the plastic holder with the nylon spudger.

    • This will remove the LCD screen from the motherboard.

  7. hSTEEGXlDuHvaZ3u

    • Unplug the wire connecting to the speaker by pinching the sides connected to the back screen.

    • Pull back away (in the opposite direction) from the connector.

    • When reassembling push back into connector. Do not need to pinch anything. The "click" sound ensures solid connection.

  8. 5fbGkoFWITJns5uo
    5fbGkoFWITJns5uo
    IHRtKn2EQcHlKa1T

    • Unplug the battery, the same way we unplugged the speaker by pinching the sides of the connection.

    • Pull away from the connector

    • When reassembling push back into connector. Do not need to pinch anything. The "click" sound ensures solid connection

  9. 42HWUgMXxBpjTFdL

    • Properly dispose of the old motherboard. Replace with the new motherboard.

    • Skip this step(i.e. do not dispose of motherboard) if this part of prerequisite guide for the back cover replacement.

    Where can I find a new motherboard?

    Robert Wyant -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tyler Wade

Mitglied seit: 16/10/15

362 Reputation

Ein Kommentar

Trying to figure out y my gps is changing screen manual even i don't touch screen

Joseph Fixler -