Einleitung

The battery is an essential component for every electronic device. The batter stores and uses charge when needed. If your device is not properly charging or is not turning on, you may need to replace the battery. Replace your current battery to increase and optimize your Toshiba Encore's battery life.

  1. 6JHOIjfHPEHuGDoC
    6JHOIjfHPEHuGDoC
    1HiIFiNsHsIyqkBr
    • Lay the tablet face down.

    • Use the Opening pick at the back of the tablet to free the clips. Begin to pull the tool up slightly and work your way around the tablet to free all the clips.

    • Remove the back panel from the tablet.

    • Using a metal prying tool could damage the device.

  2. 4tDQQw6o6cYiNiVZ
    4tDQQw6o6cYiNiVZ
    oNjXoHecWdNCMwnM
    eB4sGZYEeDDtPxXj
    • Use a pair of fine tweezers or your fingers to flip up the small retaining flap. Then, you can safely pull the ribbon cable out.

    • Repeat on both ends.

    • Make sure to pull out the hinged flap of the ribbon and not the connector.

  3. JfdUIhUUxnXQhAiQ
    • Remove the attached battery wires by pushing the plastic wire holder from right to left on top and bottom part of plastic holder.

    • Be sure to be very gentle when prying colored wires from motherboard to ensure that there is no damage.

  4. iWNiVy2gwptYfydH
    iWNiVy2gwptYfydH
    1rxonZDZCaV5sRZR
    • Use the Phillips #00 screwdriver to remove the seven battery screws connecting the battery to the unit.

  5. ay4eLApERvwBWDS1
    ay4eLApERvwBWDS1
    CVDafavc2JdO22IG
    • Remove the battery out of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Manfred Rebello

Mitglied seit: 13/02/20

145 Reputation

0 Kommentare