Toshiba Encore Mini Rear-Facing Camera Replacement

Geschrieben von: Anthony Bivens
  • Kommentare: 0
Toshiba Encore Mini Rear-Facing Camera Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 - 30 Minuten

Einleitung

The Toshiba Encore Mini has a rear-facing camera which is attached to the motherboard and requires battery removal for replacement. Therefore be advised to backup any data to external storage before beginning. As well as obtain a system to organize small screws and hand tools.

  1. S1GQcwhJHWql1ILL
    S1GQcwhJHWql1ILL
    aJLt2PWMPnHkl1Xk

    • To replace the battery, the rear cover must first be removed.

    • Using the flat end of the spudger, gently pry open the back case from the rest of the device.

    • It may be easier to start along one of the long edges and carefully work your way toward the corner, then along the short edge.

  2. HIQYHifSqVMSoxCc

    • Remove the rear cover and set it aside.

  3. 1mK1tvZdytkgeDLC

    • Carefully remove the electrical tape that holds the battery in place.

  4. cxwQ2eVdPCOcESNO
    cxwQ2eVdPCOcESNO
    6n6TgV3CXoNeDcfr

    • Using needle-nose tweezers, gently push the large white wire connector (connected to the black, red and blue wires) out of its housing.

  5. YMnYA6lcHQcXFCN4

    • Gently lift the battery out of the device.

    • Be careful not to pull on the connecting wires.

  6. BCcluVrSJXTAM2f2

    • The motherboard completely detached from the device.

    • The headphone jack and power plug are soldered to the motherboard. Therefore the motherboard must be replaced to replace these components.

  7. dFOSmMt3wPGVDTZP
    dFOSmMt3wPGVDTZP
    PKxIshkDYyopUMyu

    • Remove yellow tape.

    • Use tweezers to pull on the camera housing until it is free of the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Anthony Bivens

Mitglied seit: 04/03/17

201 Reputation

0 Kommentare