Toshiba Satellite C55-B5302 Fan Replacement

Geschrieben von: Jacob Mayes
  • Kommentare: 0
Toshiba Satellite C55-B5302 Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

10 - 20 Minuten

Einleitung

Use this guide to remove the fan from your Toshiba Satellite C55-B5302 laptop. You will need a #0 and #00 Phillips screwdriver and a plastic pry tool. Make sure your laptop is unplugged and cool before you start. The fan is easy to remove and should take 10 to 20 minutes.

  1. N2IQuIrDTPLkEPQP
    N2IQuIrDTPLkEPQP
    krJIhOqkAicJOOi3

    • Flip laptop upside down so you can see the screws.

  2. eKKsUJ51G3gKaNvk
    eKKsUJ51G3gKaNvk
    jtO41mP4roFDu5Vj

    • Using the Phillips #0 screwdriver, remove the two 7 mm screws from the back casing.

  3. AQURyfJFiDZ3Y6rs

    • Pull the battery from the back of the laptop for removal from the laptop.

  4. 1oJeHSFZo16SHHoZ
    1oJeHSFZo16SHHoZ
    UseOQINrFVKWFilW
    Xxaa2OplsfHDFJbJ

    • Remove the remaining 7 mm screws on the back panel of the laptop with a Phillips #0 screwdriver.

    • Use the plastic opening tool to pry up a corner of the back panel and continue to pop the back panel off.

    • Expect to hear popping as you pull the back panel off.

  5. hIJZhBXZOVIveCZs

    • Disconnect the fan wire from the motherboard.

  6. Db2RTO1vnL6AOXpC
    Db2RTO1vnL6AOXpC
    WZu1gGx2eXDxc4BW
    MELS1QOmurPAIyeR

    • Remove the three 3 mm screws with a Phillips #00 screwdriver.

    • Remove the 5 mm screw with a Phillips #0 screwdriver.

  7. lbnnCLdTHJPfvbBF

    • You can now lift the fan out of the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jacob Mayes

Mitglied seit: 04/10/18

283 Reputation

0 Kommentare