Toshiba Satellite C55D-B5206 Fan Replacement

Geschrieben von: Tayyaba
  • Kommentare: 0
Toshiba Satellite C55D-B5206 Fan Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

15 - 20 Minuten

Einleitung

The fan of your Toshiba Satellite C55D device may malfunction at some point. If your constantly heats up shuts down, that indicates the fan has malfunctioned. This manual will provide a step-by-step guide to replace the fan,

  1. vhlriavKcAwC22Ge
    vhlriavKcAwC22Ge
    ObRPstBBm2Qq5UEn

    • Turn the laptop upside down so the battery faces upwards.

    • Remove the two 7 mm Phillips screws that secure the battery.

  2. votlOnGPP1Y1WLgT
    votlOnGPP1Y1WLgT
    1HOcCGDxjhFWPT3s

    • Place both thumbs on the outside edges of the battery that meet the device.

    • Push the battery out and away from the laptop.

    • The battery should slide out with little resistance.

  3. kfu6NOeslGrZpDro

    • Remove the thirteen 7 mm Phillips #1 screws from the bottom of the chassis.

  4. 4ag3oLCpFpNMP4Ey

    • Starting at the center, insert a spudger into the crevice between the bottom casing and the keyboard and pry upwards.

    • Gently slide the spudger along the entire perimeter of the device and pry the casing loose to unhook six clips.

    • These images show a metal spudger, which has the potential to damage the device. Use a plastic opening tool or standard spudger instead.

    • Do not be alarmed if you feel a gentle tug or hear a click as you slide your spudger. These sounds are the clips detaching from the casing.

  5. j4ortZmYNLoveWLy
    j4ortZmYNLoveWLy
    YUKJ4bmUIl3uQuT2
    bNXLkaSvtid2Sk2P

    • Use your fingers to finish removing the casing from the device.

  6. ETqbAcxFakpAceMQ
    ETqbAcxFakpAceMQ
    RErEJwgdWf5FHpoL

    • Remove the three 7 mm Philips head screws by turning the screws counter clockwise.

  7. yjWJsaelAGrMQNGr

    • Gently lift the copper heat sink to make the fan more accessible.

    • The copper heat sink should not detach. Do not pull on it too hard.

  8. OafsVavSvVJq1rIc
    OafsVavSvVJq1rIc
    c4AGjXNqXtNjnCJy

    • Maneuver the fan's bottom left corner above the copper heat sink.

  9. OqhX6RyQhLlAUJsf

    • Cautiously move the white cable cover to allow for the fan to be lifted away.

    • Do not detach the white cable cover.

  10. e6i6AVooGl2Vj4YA

    • Lift the fan approximately one inch upward from back of the laptop.

    • Detach the white cable connector from the connective port.

  11. 1ls2gEgGCgOhGdMS

    • Once the cable port is detached, lift the fan free from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tayyaba

Mitglied seit: 25/09/15

523 Reputation

0 Kommentare