Einleitung

If your speakers lose their sound quality, it is possible to replace them.

  1. nEfBoSkBBWo1mOKx
    • Close the laptop lid and flip the laptop over.

    • Switch the lock button on the left to the unlock position. (The unlock position is to the left side.)

  2. 6GLEJZnfpyYaryPR
    6GLEJZnfpyYaryPR
    iUjBMLGrfQDITDLB
    jfCuMikclAnyPRub
    • Push the release button to the right.

    • Hold the release button to the right and lift the battery out of its housing.

  3. yejh3jFHUrdkNXh4
    yejh3jFHUrdkNXh4
    pPi1MkgMjSHIptcH
    vEVUuBaaXGXXBk5L
    • Open the laptop so the keyboard is facing you.

    • Using your fingers, remove the thin plastic cover above the keyboard.

    • Potential for device damage: Do not apply too much force when removing the cover piece as it can break.

  4. B1GedYpFtrkYDVHm
    • Remove the two 4.8 mm screws from underneath the plastic cover piece using a Phillips #00 screwdriver.

  5. WfvqpotmeAIPigdR
    WfvqpotmeAIPigdR
    1VxPFcNFR4QvMPsg
    • Starting at the top, gently raise the keyboard enough to remove it from the socket.

    • Potential for device damage: DO NOT pull out the keyboard after it's out of its socket. The keyboard is connected to the hard drive through a data cable and removing forcefully could damage the cable and laptop.

  6. V5KRspVUlA5esLrg
    V5KRspVUlA5esLrg
    BMJ4P2LLaIk1ysRB
    • Locate the data cable that is connected to the motherboard.

    • Pull the white ZIF connector towards the screen to remove it.

    • Pull the black ribbon cable away from the screen.

  7. h1PThA5SvAZQhe3Y
    • With the black ribbon cable now disconnected, remove the keyboard from its housing.

  8. 1vkunuAys4FO2iPY
    • Close the laptop and flip it over.

    • Remove all the 6.6 mm type-00 Phillips head screws along the perimeter and in the center of the laptop.

  9. eIcS4rvnawKWs5Zl
    • Remove the three 3.7 mm type-00 Phillips head screws located in the battery compartment.

  10. HnxLaHKMpwJyKooM
    HnxLaHKMpwJyKooM
    VJeGHDjHj4oFhbvG
    • Flip the laptop over and open the screen as far back as it can go.

  11. KwoTPpDV6Qkl5xtO
    KwoTPpDV6Qkl5xtO
    kpqHLUTDqadknHT3
    • Using your fingers, slide the black ZIF connector out.

    • Once the ZIF connector has been moved, the white ribbon cable can be removed.

  12. 2Tvkwfj24KT2VEyM
    2Tvkwfj24KT2VEyM
    MXZIUCcoDlIAPntF
    • Using your fingers, remove the white plastic connector located to the right of the ribbon connector.

  13. DP5EcaXDUEpDVkLZ
    DP5EcaXDUEpDVkLZ
    Ib2bvAu2JKBZ2tYC
    ZKVkmANWNR2KaKg5
    • Use the blue plastic opening tool to begin removing the cover.

    • After creating enough space, you can use your hands to completely open the cover.

    • Make sure all the screws have been removed before attempting to open the cover.

  14. Zpuk5GJbAY1qATns
    Zpuk5GJbAY1qATns
    2IUJbhHS2q4Dp1AO
    • Put the laptop aside and locate the speakers attached to the cover.

    • Remove the two 3.6 mm type-00 Phillips head screws from each speaker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Juan

Mitglied seit: 11/01/13

109 Reputation

0 Kommentare