Einleitung

If your Toshiba Satellite P55W-C5200X is experiencing issues such as white spots and colored lines appearing, buzzing or random shutoffs, then it is clear your display is no longer functional. This may be due to the LED monitor, a faulty CFL monitor and/or power adapter. The best course of action is to replace the display assembly before problems become worse.

  1. NkUgqSZELwaXX3vt
    NkUgqSZELwaXX3vt
    XgSAPSXiLDjYHBAI
    j1Nr4fjYEruCUN61
    • Use the Phillips #00 screwdriver to remove the ten 4.0 mm screws located at the bottom of the laptop.

  2. iBFYPiAe1asn5puh
    • Use the black nylon spudger to pry the back casing along the edges.

    • Continue to pry along the edge of the back case until the back is ready to be removed.

  3. gUXHNKEJmHXsInfa
    gUXHNKEJmHXsInfa
    EY6dbKDqiL3waVic
    • Remove the four 6.0 mm screws that hold the battery in place using the JIS #000 screwdriver.

  4. gW1GSDd5ebTAXqtK
    gW1GSDd5ebTAXqtK
    dRTMnDBAV5XiXHaR
    • Disconnect the battery cable from the motherboard by carefully pulling on the black wire at the point closest to the white tab.

  5. RDvK5REx2MHoCACg
    RDvK5REx2MHoCACg
    Hutb55hk3IDMYXK4
    • Gently remove the battery from your device.

  6. aRiPjCiMBXRiP1Wr
    aRiPjCiMBXRiP1Wr
    6Mw2VDXimlAXVNsd
    5RuBO1HB4sE5I1Kc
    • Use the Phillips #00 screwdriver to remove the six 5.0 mm screws that are holding the metal brackets on both sides in place.

    • Gently remove both metal brackets.

  7. GY4VYnWWnILMZGPW
    GY4VYnWWnILMZGPW
    6iqNJ1XIqI5CvRCe
    JUCWhpPF6f13GGqu
    • Remove he three wires connected to the motherboard.

  8. 3NopE63TRCHLeW2f
    3NopE63TRCHLeW2f
    E52ceqJpBG6imMRw
    ONfaPMO1JLjK1MAi
    • On the other side remove the four remaining wires from their ports.

  9. ENJWdbq4m2W4ELuJ
    ENJWdbq4m2W4ELuJ
    2qSEXhtj1CeCMKCE
    hYVnpCttKlVWZUeZ
    • Lift two sets of metal brackets up, one in each corner.

    • Depending on the force needed on your specific device, you may need to use the spudger.

  10. mk4L6mhoRR51KGeu
    mk4L6mhoRR51KGeu
    1iJ13wN23SWT3DGT
    • Gently lift the device away from the display assembly.

    • Be aware of the wires attached to the screen so they don't snag on anything.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Hadi Termos

Mitglied seit: 21/10/19

238 Reputation

0 Kommentare