Einleitung

The RAM card is the part of the computer that has memory and stores the data being used by the computer. It keeps the computer's functions regulating smoothly. Below are a few steps to take in order to remove and replace the computer's RAM Cards.

  1. imAdSeZYZwhpDFL1
    imAdSeZYZwhpDFL1
    whtZQygwjewkiork
    • Push the locking tabs away from each other.

  2. 2QWAOwTFEDjF2tTW
    2QWAOwTFEDjF2tTW
    6I45Mux5RpAOXBX5
    • Pull up on the battery to remove.

  3. W6gcPYPRVvduOslJ
    W6gcPYPRVvduOslJ
    NuGjZQfcHXsbiPrZ
    • Remove the 3mm Phillips #0 screw from the cover.

  4. SNmUFrRW1XVqCwNm
    SNmUFrRW1XVqCwNm
    quGZPgbP2NIdNsVE
    keNJEU22cuKOTvEY
    • Use a plastic opening tool to lift up the cover and remove by hand.

  5. W3IMyMKiQWo2M6SB
    W3IMyMKiQWo2M6SB
    YRuwfysmdcXBjgMq
    wWjQ2n6XuGIW1ErE
    • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


    • When released, the RAM module will pop up at a slight angle.

    • 
Lift the RAM module to an angle of about 30 degrees and slide it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Benson Smith

Mitglied seit: 25/01/18

351 Reputation

0 Kommentare