Toshiba Satellite Radius P55W-B5112 Battery Replacement

Geschrieben von: Mudassar Abbas Khan
  • Kommentare: 1
Toshiba Satellite Radius P55W-B5112 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 - 20 Minuten

Einleitung

This battery replacement guide can be used to safely remove and replace the battery from a Toshiba Satellite Radius P55W-B5112 computer. Battery removal is a key step to safely perform further repairs on this computer.

  1. sDmFruoXlDUPVrOk
    sDmFruoXlDUPVrOk
    LS1kGgpKSEhZOvyY
    qDEyRg2xHCHnAZ3q

    • Unplug your laptop from any source of power.

    • Lay your laptop on a soft, clean surface as shown.

    • Using the metal spudger, remove the two rubber grips on the bottom face of the laptop, located closest to the hinge.

    • The grips may be brittle. Be careful when removing them with the metal spudger so as not to damage them.

  2. AgVKLyWlng41cKri
    AgVKLyWlng41cKri
    Ir5jjXVTPmFRiNIB
    6RMpAi1QtsMfdQrn

    • Remove the ten 5mm Phillips #0 screws that secure the back plate to the computer.

  3. vSbAH2tQsyMHmPjK
    vSbAH2tQsyMHmPjK
    fxXmXyeadcNLZSsh
    6AtinqE3ltauvHfn

    • Starting on the edge that is opposite the hinge, use the plastic opening tools to pry the back plate away from the computer.

    • Loosen the three non-hinge edges.

    • Leave a plastic opening tool in each corner to ensure that one side does not snap closed before you are done opening the others.

    • DO NOT lift the back plate away from the computer; it is still connected to the motherboard.

  4. OjuwtJXAvTLUMJ5f
    OjuwtJXAvTLUMJ5f
    2ufHSAmNOuLqc6UJ
    fcrkBc4pYBjDWkcE

    • To loosen the back plate, lift it slightly and gently pull it away from the hinge.

    • Flip the back plate open towards the power button, but be sure to not pull on the ribbon cable that connects the back plate to the motherboard.

    • Use a plastic opening tool to detach the side of the ribbon cable connected to the computer by prying up gently on the small black lever at the point of attachment.

  5. WbAs1k15yQd6MULv
    WbAs1k15yQd6MULv
    tnAQvDNHASlG2mRK
    QbvSPjMgaOyCiKCI

    • Remove the four 3mm Phillips #0 screws connecting the battery to the computer.

  6. IDOHTAbZnFoWoTcM
    IDOHTAbZnFoWoTcM
    XZOJkORpcgHeuwQa
    VdwnJlKjlxpom3oC

    • Use a plastic opening tool to lift the side of the battery that is closest to the long edge of the computer.

    • As you are pulling the battery away from the computer, unplug it from the side closest to the short edge of the computer.

    • There may be a lot of resistance when unplugging the battery. If there is, try to wiggle the male side of the plug back and forth as you remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mudassar Abbas Khan

Mitglied seit: 19/10/17

624 Reputation

Ein Kommentar

Thanks for your support..

vamshikrishna oruganti -