Einleitung

If your Toshiba Satellite S55t-C5225 is experiencing quality errors in the screen or visible damage then the screen might need to be replaced. This replacement guide should be followed if you are experiencing the problems mentioned above.

  1. nNgI24ALODqr3MeV
    • Shut down the computer and disconnect all cables

    • Flip the computer over so the bottom is facing up.

  2. hHXmJVMdcN3X5bio
    hHXmJVMdcN3X5bio
    AUvKyKK5TcFQwGF4
    • Remove the two 7.0 mm Phillips #0 screws that hold the battery in place.

  3. bnDc2yKNs5ChPPcD
    bnDc2yKNs5ChPPcD
    ZUPmRgMBtUyruw1W
    • Carefully remove the battery by wedging a plastic opening tool in-between the battery and back cover.

  4. cep3TxBOgKKvUyQc
    cep3TxBOgKKvUyQc
    SuEg5rFfT1MF53UI
    • Remove the eleven 7.0 mm Phillips #0 screws that secure the back cover.

    Hi, do you maybe have any instructions on which screw Goes where? I have it all mixed up..

    unatuu -

  5. fngf2qHS4gFASWRn
    fngf2qHS4gFASWRn
    HAJWZIYOVQFhLjUJ
    • Wedge the tip of a plastic opening tool between the back cover and metal frame.

    • Twist the plastic tool, while wedged, to release the retaining tabs from the frame.

    • Repeat these steps around the laptop to release all retaining tabs.

  6. uFqAbnBtNtOQqxOL
    uFqAbnBtNtOQqxOL
    EgVTVCuQPmpXfNqN
    • Once all retaining tabs are released, pull up on the cover to remove.

  7. XtNSvWBhwdJRcjOp
    • Disconnect the power button strip by flipping up the white plastic clamp that connects it to the motherboard.

    • Pull the ribbon wire out from plastic clamp.

  8. XrYV2eKIXYoZ4HbH
    XrYV2eKIXYoZ4HbH
    LPFoFGPthTSOgAOm
    • Remove the four 10.0 mm Phillips #0 screws that hold the speakers in place.

  9. ihWrluXYpArrZEFR
    ihWrluXYpArrZEFR
    xDBmTXZXQD1kZg4H
    • Follow the black wire that connects the speakers to the motherboard.

    • Pull the wire out from its socket to disconnect the speakers from the motherboard.

  10. rwQB4D2SOjUsCFKg
    rwQB4D2SOjUsCFKg
    CeUHmOmWWtESu4dN
    • Lift speakers up from their mounted position to remove.

  11. HFYFy1UDR3AoBDWb
    HFYFy1UDR3AoBDWb
    pav2XgnLMTyrFWNQ
    • Disconnect LAN from the motherboard power wire. Pop up the white clamp that holds it in place, then pull the wire out.

  12. DyuesLy1kNmuQQYc
    DyuesLy1kNmuQQYc
    pqJtlxFWMqEuKeeW
    • Disconnect the two cables connecting the screen assembly to the WIFI card.

  13. NlAxHDOGgeFl1b2W
    NlAxHDOGgeFl1b2W
    ympLCCPt2NhQh3ef
    Ue4LXbFLqmUSamJM
    • Disconnect all remaining cables that connect the screen assembly to the motherboard.

  14. bYWjTflOOE6GgAxW
    • Disconnect all remaining cables that connect the screen assembly to the motherboard.

  15. 6vcUKs2BWRjqOGfm
    6vcUKs2BWRjqOGfm
    X6eydWjFBrS2qEof
    • Remove the four 7.0 mm Phillips #0 screws on both ends of the laptop that attach the screen assembly to the laptop.

  16. iqWTOClQaWcsiXwU
    iqWTOClQaWcsiXwU
    tjiCVToCVGboQqUE
    k3fQD1naiGWYM5i6
    • Slowly open laptop while the bottom is facing up. Begin to separate the bottom of laptop from the screen assembly brackets.

    • Remove the screen assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Javien Delgado

Mitglied seit: 21/10/19

217 Reputation

0 Kommentare