Einleitung

If your toy lightsaber needs new batteries, follow this guide. People always expect the lightsaber to light up whenever they see them in the movies, so it makes sense that people might forget that there’s an earthly non-sci-fi reason why the blade lights up for these grounded imitations. Truthfully, it’s usually not an item professional fixers would be called on to repair. Therefore, it is imperative for people to have the knowledge to be able fix a toy lightsaber with basic tools they could find around the house and without the stress of trying to find a professional.


  1. IpY1csOVBvTaML3O
    IpY1csOVBvTaML3O
    DUujTX4Qd1psIPHj
    PROSTPVENn4xc55Q
    • Remove the Lightsaber blade by carefully twisting it off the hilt.

    • Be gentle during this process to avoid damaging the blade or the hilt.

  2. utOchpVTPOgMVXAS
    utOchpVTPOgMVXAS
    IrsuYdAmWd3mVPCB
    gN1aUERlNePKOxUh
    • Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.

  3. FdUkSxUjbmQj1Cui
    FdUkSxUjbmQj1Cui
    4AjigrQtniryKFIo
    UBBofWmotdkSPdXa
    • Remove the old C batteries.

    • If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.

    • Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.

  4. HeiBFAkyaB1TMLXZ
    HeiBFAkyaB1TMLXZ
    DSZIQGQmVTNPcgUI
    hgIoUyGpBKjSXLGm
    • Place the new C batteries inside the newly cleaned hilt.

  5. y2FOKgHJ45XNvuOZ
    y2FOKgHJ45XNvuOZ
    Q53e2UQoAsnO4JsM
    LDBKwDZOTPJNocr6
    • Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.

  6. gHCcYpVL5tEi5PJi
    gHCcYpVL5tEi5PJi
    icTUR1pyWBkE2wbG
    DYNeGcA2FHqmdBEu
    • Lastly, twist the Lightsaber blade back on top of the hilt.

    • Press the red button on the hilt to test if the blade glows.

    • If the blade doesn't glow, start over and try again with different C batteries.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Zachary Adaes

Mitglied seit: 22/03/21

133 Reputation

0 Kommentare