Toyota Corolla 2018 Brake Light Replacement

Geschrieben von: Nishanth Selvarajah
  • Kommentare: 0
Toyota Corolla 2018 Brake Light Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 - 7 Minuten

Einleitung

If your brake light has certain issues that stop the light from working such as a burned-out bulb, a bad brake light switch, or blown fuse, this guide will provide you thorough instructions on how to replace new brake lights for a Toyota Corolla year 2018.

Werkzeuge

Ersatzteile

  1. uXZGLRZPexI5glFm
    uXZGLRZPexI5glFm
    JeHvl2K1ipjWAe4t

    • Open the trunk lid and remove the two black plastic fasteners on the side of the car with burnt out lights using a flat head screwdriver.

  2. jjHgvA5DtUxSDFSy
    jjHgvA5DtUxSDFSy
    5xtte3qaeNFpEFJJ

    • Pull back the carpet to access the bulbs and locate between the rear turn signal bulb and brake light.

    • The rear turn signal bulb is located at the top and has a grey cap.

    • The brake light is located at the bottom and has an orange cap.

  3. Z4RH4ADgEGIXX1LE
    Z4RH4ADgEGIXX1LE
    UAlAswgC5MX6P3Vl

    • Turn the brake light counterclockwise and pull the old light straight out of the socket.

  4. VIAHhgrptfCcFGAI

    • Replace the new bulb and push it in the socket.

  5. QmtoIih6PnLymN5v

    • Turn the socket clockwise while placing it in the housing.

  6. uiaiuoTs3qiinEEW
    uiaiuoTs3qiinEEW
    aiTPiXCsKwCqDsBY

    • Push the carpet back in place and screw in the two fasteners to secure the trunk liner.

Tinte & Feder

Nishanth Selvarajah

Mitglied seit: 08/07/20

160 Reputation

0 Kommentare