Einleitung
Every kendama player has experienced a broken string or a knot coming undone. It can be frustrating dealing with frayed strings and lost beads. These steps should quickly get your kendama back into its prime condition.
Werkzeuge
Ersatzteile
-
-
Remove the damaged string and the small plastic bead completely, using scissors if necessary.
-
-
-
Flip the kendama over to the other side, so that the big cup is now on the left-hand side.
-
Pull the end of the string until it extends about an inch out of the hole. This will be used to tie the knot.
-
-
-
To tie the knot, begin by taking the inch of extended string and making a small loop.
-
Put the tip of the string through the loop.
-
Put the tip of the string through the loop a second time to strengthen the knot. Pull the knot tight.
-
-
-
Now, we will attach the ball.
-
Begin by placing the ball upright, with the small hole on top.
-
Insert the free end of the string through the small hole, and continue pushing it through until it comes out the big hole on the bottom.
-
-
-
Thread the free end of the string through a small plastic bead, and allow the bead to slide down into the ball.
-
Now, with about an inch of string extending out from the big hole, we will tie a knot on the free end of the string, just like what was done in step 5.
-
The kendama is ready to go!
-
Strings are bound to become damaged through excessive kendama use. However, these steps should save you plenty of time and frustration when repairing your beloved kendama.
For replacement strings visit: https://shop.kendamausa.com/collections/...
Ein Kommentar
This tutorial is awesome, waiting for the next tutorial on how to be 99 parsing warlock.
Try using the note tool instead of just saying note
Hayden -