Einleitung
The power cable developed an intermittent fault near where it enters the device so I needed to disassemble it.
Werkzeuge
-
-
Only 2 screws for main body case.
-
The left hand screw was covered by a softish translucent disc (shown in bottom left of photo) - easily removed with a pointy spudger.
-
-
-
Gently work the spudger blade in and depress the 2 marked snap fit clips enough to free the top of the case.
-
Once the two clips on this side are free you should be able to wiggle the top of the case enough to hinge it open.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
