VTech InnoTab Max Battery Replacement

Geschrieben von: Jacob Schioppo
  • Kommentare: 11
VTech InnoTab Max Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

10 - 20 Minuten

Einleitung

This guide will show how to replace the battery in the VTech InnoTab Max.

  1. LbDIxiU24HbFJCDX
    LbDIxiU24HbFJCDX
    HFWOSoYaFayLERum
    pexJwlyDJDnWnYvH

    • Remove all screw caps from the back panel using a metal spudger.

  2. PvEIUsTHb1HFA52M
    PvEIUsTHb1HFA52M
    cIgF2axrvupTsog2
    51qVk4S1trFoqieT

    • Next remove all of the now uncovered screws.

    • If there is a cartridge in the device make sure to remove it.

    Don’t forget the 2 screws under the cartridge.

    Kim Sihota -

  3. memjk3EpqRagt1N2
    memjk3EpqRagt1N2
    Z3rWUymFyQJyNEHb

    • Now that all of the screws have been removed, pry the back cover off using a plastic opening tool.

  4. gNNRQgpNQVHNeB2j
    gNNRQgpNQVHNeB2j
    YxdokDWBawnODlqM

    • Here you can see the back cover has been fully removed and you can now access the front cover.

    • To remove the front cover, remove the springs holding the pictured brackets in place, then pull it away.

  5. kLTnUdFgPfiJeqY1

    • Once the back cover is removed the battery will be located in the bottom right as you can see in the image to the right.

  6. 2PkQQODKZmZkkIZG
    2PkQQODKZmZkkIZG
    hEHPOo6afDkKnmlB
    OgVFnPKUBLH2aapm

    • Remove the tape holding down the wires, and carefully pry the battery off of the base of the device.

    • Pry carefully to avoid damaging the battery. The battery may start to bend slightly, this is normal and not a cause for concern.

    • It is best to use a plastic card or nylon spudger to remove the battery. Metal tools can puncture a battery, potentially causing a fire.

    The double sided tape used to hold down the battery is overkill. I actually had to slice through it CAREFULLY in order to release the battery.

    Kim Sihota -

  7. cvUqv6pA5ZVLxJEw
    cvUqv6pA5ZVLxJEw
    V6wHTghsPiqdAAFf
    VO3XM3lNbs6Pkvqa

    • Now that the battery is free to be moved, unplug the wire connecting the battery to the motherboard.

  8. yApkIloRFmFlM2AD

    • The battery is now fully disconnected.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jacob Schioppo

Mitglied seit: 15/02/17

533 Reputation

9 Kommentare

Thank you for the useful guide!

Which battery (exact specs) can be used as a replacement?

kermit -

Where can we purchase a replacement battery

Frank Godon -

Where can we buy a replacement battery

Frank Godon -

Nice of you to show this, but I can not find that particular battery anywhere. Not even the China website.

Let us know where we can get the battery.

Donald Josefczyk -

Since it seems like a replacement battery cannot be purchased anywhere, can the battery be bypassed to still use it plugged in? I know it defeats the purpose of a tablet, but it would be nice to still use it. Anyone have suggestions?

ktmm -

I used a replacement battery for a tablet w/a red, black and white bare wire. I cut the wire long with connector attached off the old battery. I spliced them and it now works and charges. Also had to do some trimming and shaving of the compartment with an exacto knife so battery would fit. I am sure if you look on eBay you can find a bare wire black, red and white. I got mine on ebay for rca tab. but it was wrong, RCA only uses Black and red wire.

Kathleen A Dombrowski -

Does someone know where to buy this battery, or Which battery (exact specs) can be used as a replacement?

Thanks

peltiarn -

Bonjour

où puis je trouver cette batterie ?

Merci

alainparent62 -

Where can I get replacement batteries for innoTab3S

gwendolynheatley59 -