VTech InnoTab Max Camera Replacement

Geschrieben von: Jacob Schioppo
  • Kommentare: 1
VTech InnoTab Max Camera Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 - 15 Minuten

Einleitung

This guide will show how to replace the camera in the Vtech InnoTab Max.

  1. LbDIxiU24HbFJCDX
    LbDIxiU24HbFJCDX
    HFWOSoYaFayLERum
    pexJwlyDJDnWnYvH

    • Remove all screw caps from the back panel using a metal spudger.

  2. PvEIUsTHb1HFA52M
    PvEIUsTHb1HFA52M
    cIgF2axrvupTsog2
    51qVk4S1trFoqieT

    • Next remove all of the now uncovered screws.

    • If there is a cartridge in the device make sure to remove it.

    Don’t forget the 2 screws under the cartridge.

    Kim Sihota -

  3. memjk3EpqRagt1N2
    memjk3EpqRagt1N2
    Z3rWUymFyQJyNEHb

    • Now that all of the screws have been removed, pry the back cover off using a plastic opening tool.

  4. gNNRQgpNQVHNeB2j
    gNNRQgpNQVHNeB2j
    YxdokDWBawnODlqM

    • Here you can see the back cover has been fully removed and you can now access the front cover.

    • To remove the front cover, remove the springs holding the pictured brackets in place, then pull it away.

  5. bjpwHEKKZa2bEkZy

    • The camera is not held down by anything, so simply remove it from it's spot to prepare for unplugging it.

  6. Dpf1eUBTNPOkU4pg
    Dpf1eUBTNPOkU4pg
    VMTgqQNdSWyAUJJg

    • Carefully remove the wire connecting the camera to the motherboard, using a tool to grip it if needed.

    • Be careful to only pull from the end of the connector (closest to the motherboard), as the strip is easy to tear.

  7. IVJhLJnI4v5XUeYB

    • The camera is now removed completely removed from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jacob Schioppo

Mitglied seit: 15/02/17

533 Reputation

0 Kommentare