Einleitung

Sounds easy, but you need to modify the new rear mudguard.

The most time consuming step is to buy the mudguards. This sounds easy except

  • Vanmoof don't list the mudguards. Email Vanmoof support and they'll create a special sales link. You need to buy the M2/M3 mudguards which can be made to fit.
  • They only ship to certain countries (why, it’s just postage?). It took 6 months to pick mine up !!
  1. rVCYlHakG46hORjP
    • Make sure you get 2 mudguards, one set of stays that are straight for the rear, and a second that have a bend. Also make sure you have the two rear connection pieces.

  2. p15bnsRfZFRHJgse
    • You need to cut both sides of the mudguard so it can fit between the chain stays, and drill a new hole to attach to the bottom of the frame.

  3. WUiZLDyod1KROXNV
    WUiZLDyod1KROXNV
    YVgIWFqLkvPnRAmI
    B1O4kiNFjhXtcaQa
    • The rear mudguard will need to be cut at the front.

    • First cut at parallel to the bottom about 16mm long

    • Second cut is 7mm in from the rounded edge

  4. Qsdg5gHWDMxXM4bO
    Qsdg5gHWDMxXM4bO
    HXIBBWvSwTeKsle2
    4VlBJcfEvBgFifaD
    • Bend the edges over so you make a rounded lip

  5. 2DQGrobMAyrHMrQi
    • Drill the frame attachment hole

    • Bolt to the frame

Abschluss

To reassemble your device, follow these instructions in reverse order.

Martin Hampton

Mitglied seit: 13/02/16

1298 Reputation

0 Kommentare