-
-
With foot OFF the brake (don't want to start the car), push the start button (headlamps and interior systems come on).
-
-
-
Push the accelerator pedal in for ten seconds then let go - you will hear the water pump cycle on.
-
-
-
Set a timer for 12-15 minutes. In this time period, you will hear the water pump cycle on and off and coolant gurgling at the reservoir.
-
-
-
After 12-15 minutes turn the car off, remove the reservoir cap and check the fluid - it should be slightly below where you started.
-
-
-
Start your car. Watch your temperature. If the car will run without overheating you're done. If you will notice that the temperature is rising repeat these steps.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.