Einleitung

These are the instructions on how to replace a broken antenna in your Galaxy Ellipsis 8. The repair will require a Phillips #00 screwdriver and a plastic opening tool. We have described it as easy in terms of difficulty and expect that it will take the user only about 8 minutes to complete.

  1. PLhuBvSiymInwoft
    • Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.

    • Remove the back case.

    Add caution or some other bullets and say “you need to pull hard on the lid“.

    Jack -

  2. y5NcfVQVQKcMswRs
    • Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

    Add screw IDs (ph1, ph2…etc)

    Jack -

    Mark up screws.

    Jack -

    Say it turns counterclockwise.

    Jack -

    The screw ID is PH000

    Jack -

  3. Bi4QvUbQKojETBAh
    • Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

    There are two sides. Say you are removing only one side.

    Jack -

  4. uUxAhWY16iEFGOX4
    • Lift and remove the battery from the device.

    In this photo the tape looks like it is not detached. But in the previous step it says “remove the tape“.

    Jack -

  5. v2jiONUHATNUO4uL
    • Using a plastic opening tool, lift the motherboard along the top right edge of the device.

  6. EHbxwM4YJ1alMQZY
    EHbxwM4YJ1alMQZY
    4NXTRBI24MRnqqsI
    IqDWj5iohsPjAsfs
    • Once you have access to the antenna, remove it and replace it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jack

Mitglied seit: 06/02/19

589 Reputation

0 Kommentare