Verizon Ellipsis 8 Speaker Replacement

Geschrieben von: Sreedhar Kesari
  • Kommentare: 7
Verizon Ellipsis 8 Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

20 Minuten

Einleitung

This guide details steps on replacing the motherboard and speaker system for the tablet.

The motherboard and speaker system are one unit, so replacing the speaker will require the replacement of the motherboard system as well.

  1. PLhuBvSiymInwoft

    • Using a plastic opening tool, slowly pry along the seam running along the edge of the device until the back case snaps free.

    • Remove the back case.

    Add caution or some other bullets and say “you need to pull hard on the lid“.

    Jack -

  2. y5NcfVQVQKcMswRs

    • Using a Phillips #00 screwdriver, remove the two 0.1 mm screws on the green bracket.

    Add screw IDs (ph1, ph2…etc)

    Jack -

    Mark up screws.

    Jack -

    Say it turns counterclockwise.

    Jack -

    The screw ID is PH000

    Jack -

  3. Bi4QvUbQKojETBAh

    • Once you remove the backing of the Verizon Ellipsis 8, gently use the spudger to lift one side of the tape. Once you have lifted the tape, slowly remove it until it is completely off the battery.

    There are two sides. Say you are removing only one side.

    Jack -

  4. uUxAhWY16iEFGOX4

    • Lift and remove the battery from the device.

    In this photo the tape looks like it is not detached. But in the previous step it says “remove the tape“.

    Jack -

  5. 3effTxQXs3R5qMoY
    3effTxQXs3R5qMoY
    IWowdbMLKyE15VZT
    XrDYAXqKTkMx3Sb2

    • Remove all 5 screws from their respective holes using the Phillips #00 screwdriver.

    • Remove the speaker from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sreedhar Kesari

Mitglied seit: 11/11/19

190 Reputation

0 Kommentare