Verizon Jetpack 4G LTE Mobile Hotspot Screen Replacement

Geschrieben von: Analisa Caso
  • Kommentare: 5
Verizon Jetpack 4G LTE Mobile Hotspot Screen Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

15 Minuten

Einleitung

The screen of the hotspot holds the basis to the device. Before you begin, be aware that it might take longer than you would expect. Be prepared to have the proper tools available such as the Phillips #000 screwdriver and metal spudger. Make sure the SIM Card and battery are removed before handling the screen. If you do not do that, it can cause an injury.

  1. CFn4jvkDmJsdjPcP
    CFn4jvkDmJsdjPcP
    vBWqPWTAK2FQP5on

    • Hold the device with your non-dominant hand, looking at the back of the device, taking note of the small notch along the edge.

  2. kQKqAOTAh5lr2mQ3
    kQKqAOTAh5lr2mQ3
    PORvsZtpNZAs5cRt

    • While holding the device with your non-dominant hand, use your dominant hand to gently pry the back casing off the device. The most effective way to do this is by gripping the small notch.

    • If it doesn't come off, try using alternative grips that are the most comfortable for you. Try using your fingernails to pry up at the corner or around the edge of the backing. The case should come off easily.

    • The back should be completely removed.

  3. wUSRFOICAkEeOGXE

    • The battery should now be visible. Gently grasp the edges to lift it out of the device.

    • The device in picture no longer has a battery but a normal device will likely have a battery once opened.

  4. wJJHoLZZN3ATXAlP

    • Now that the battery is out, the SIM Card should be visible. Simply grasp it and pull it out of the device.

    • The device in picture no longer has a SIM card but a normal device will likely have a SIM card once opened.

  5. FZq4pwgGlWmGRyYq
    FZq4pwgGlWmGRyYq
    yHFiLLjdjS5v1KoJ

    • Using a Phillips #000 screwdriver, remove the screws found on the four corners of the back of the device.

    • The device pictured is extremely damaged. A normal device should not appear as bent and broken.

    • The screws are very small and may require some patience to get a proper grip.

    Where can I find the screen?

    Erick Reyes Corrales -

  6. 5WkNo3kjMGUVILb2
    5WkNo3kjMGUVILb2
    PLyJctsn2oYNJvbk
    UPriESZTCBKRW4MK

    • Using the metal spudger, pry the plastic casing around the device.

  7. rxWH3BDIcybqREUb
    rxWH3BDIcybqREUb
    GglX16RqukskWKy6

    • Using the metal spudger, gently pull out the motherboard from the plastic casing.

  8. aYpVjfvUlVmjRjBd
    aYpVjfvUlVmjRjBd
    3AEHtNWyuGxfahnL
    GTF3l3ovXdAjuDpV

    • Rotate the motherboard so that the screen is facing you.

    • Gently pull up the orange tape to remove the screen.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Analisa Caso

Mitglied seit: 08/10/18

223 Reputation

4 Kommentare

I would like to know where I can buy the screen from.

Kamil -

Question: I have a cracked screen on my 8800L. I also have a 7730L. Can I put the screen from my 7730L in my 8800L? Will it fit?

masa -

Too bad this guide did not do what most folks are looking for, replacing the screen glass. Where to buy replacement glass and actual screen would be great!

luffman -

for parts and tools scan to the bottom click ifixit, stores, then country or pro wholesale. then it will give you the option tools or parts from there you should be able to find what you desire. clicking the link will take you to another page. Good

Charlie Chick -