Vtech InnoTab 3S Rear Panel Replacement

Geschrieben von: Karina Garcia
  • Kommentare: 1
Vtech InnoTab 3S Rear Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

8 - 20 Minuten

Einleitung

In order to repair the Vtech InnoTab 3s, it's necessary to know how to properly take apart the rear panel of the device.

The standard battery options for the InnoTab 3S is four AA batteries. Vtech also offers a rechargeable battery online. Both battery options are removed from the device in the same way.

  1. AN4NflwPOsSD2qge
    AN4NflwPOsSD2qge
    utWMswdXJoMSBmRY
    uyJpauGYyK1qLH6e

    • While holding the battery compartment locks down, slide the two battery doors outwards from the sides of the device.

    • Remove the batteries from the device.

  2. FQ2GMogw1xnN563s
    FQ2GMogw1xnN563s
    RNXSFJ4syuoZNyJt

    • Remove six 7 mm screws from the interior of the battery compartment using a Phillips #1 screwdriver.

  3. aDIsGvdFQGA6eILY
    aDIsGvdFQGA6eILY
    bp5iJxHBppuBOL5W
    vHqdMPeaologKDOI

    • Using a nylon spudger, remove the five caps that hide the screws.

    • Potential for device damage: Be careful not to scrape the plastic from the device using the spudger.

    • When removing the caps, hold the spudger vertical to the board to make removal easier. Also try to push in with your spudger pointing towards the bottom of the device.

    • Remove the five 5 mm Phillips #1 screws from the rear panel of the device.

  4. hmkXcDRva6I6ngDt

    • Carefully remove the rear panel from the front panel of the device.

    • Once the rear panel is removed, you'll be able to see the motherboard and other components within the Vtech InnoTab 3s.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Karina Garcia

Mitglied seit: 30/08/15

824 Reputation

Ein Kommentar

too dumb i tryed 7 times it didnt work i reat this 1000000-/10

Kyron Ostrander -