Vtech Kidibeats Drum Set Back Panel Replacement

Geschrieben von: Aaron Klementowski
  • Kommentare: 0
Vtech Kidibeats Drum Set Back Panel Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

Keine Schätzung

Einleitung

  1. YVP6rOZNKUBMyPXP

    • Locate the battery panel that is centered between the three leg supports at the bottom of the drum set.

  2. TPmfo2OWWYXvc5p6

    • To remove the battery panel, loosen the 10 mm panel screw using a flathead 4.0 screwdriver.

    • You can also use a small coin to loosen the screw.

  3. DDnXY6GEOlb3kORq

    • Using your fingers, pry open and remove the back battery panel.

  4. lZs1msXpnmAZXxiR

    • Use your fingers to remove each battery from its housing.

  5. KjGA2b32ZdB1tQcx

    • Using a Phillips #2 screwdriver, loosen and remove the six 14 mm screws.

  6. 5CocNM1Rr2rmSqx2
    5CocNM1Rr2rmSqx2
    i3JcisjBVHLgpcAD

    • With your hands, separate the bottom panel from the drum set.

    • When removing the bottom panel, be careful not to pull too hard in order to prevent damaging the connections from the motherboard to the speaker and power source.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Aaron Klementowski

Mitglied seit: 10/02/16

820 Reputation

0 Kommentare