Wacker Pump PG1 2014 Air Box Replacement

Geschrieben von: Carsten Frauenheim
  • Kommentare: 0
Wacker Pump PG1 2014 Air Box Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

Keine Schätzung

Einleitung

Prerequisite only! This procedure is part of another guide and is not meant to be used alone.

Use this guide to remove the air box on a Wacker PG1 (2014) Pump.

  1. 4XNBHUoBOEUKnTHe
    4XNBHUoBOEUKnTHe
    fFirnes2hIApx6RL

    • Before beginning repairs, disconnect and remove all hoses.

    • Flip the motor ignition switch into the OFF position.

  2. QVlZftYwcoPLJLxI

    • Use a 4 mm hex key to remove the bolt securing the engine cover.

  3. uSEFMvc2ePoVSog3
    uSEFMvc2ePoVSog3
    bRHJqRFKqRCQYksU

    • Lift up to remove the engine cover.

  4. ngUT2UJAfTvPuEwN
    ngUT2UJAfTvPuEwN
    PmfnZRVRIfKywjGF

    • Use your fingers to pinch the locking tab on the top of the air box cover.

  5. ChLSDMigwFUNQiEc
    ChLSDMigwFUNQiEc
    GmbJnde5EN3ZQuuV
    EfiuDZJGb1sjU2oA

    • Tilt the unlocked air cleaner cover down and pull it away from the air box to unhook it.

    • Remove the air box cover.

  6. bekv4LCEdDHwdVHG

    • Use a 6 mm socket to remove the two nuts securing the air box.

  7. ucxi4LUYOh2tnOgt
    ucxi4LUYOh2tnOgt
    agAyAMpaCjTyGKMh
    jhUEL5GHNFdue5ph

    • Pull the air box directly away from the motor to remove it.

    • Once removed, the metal bracket inside of the air box will become loose. Don't lose it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Carsten Frauenheim

Mitglied seit: 10/03/20

88317 Reputation

0 Kommentare