Wacker Pump PG1 2014 Float Chamber Housing Replacement

Geschrieben von: Carsten Frauenheim
  • Kommentare: 0
Wacker Pump PG1 2014 Float Chamber Housing Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 15 Minuten

Einleitung

Prerequisite only! This procedure is part of another guide and is not meant to be used alone.

Use this guide to remove or replace the float chamber housing assembly on a Wacker PG1 (2014) Pump.

  1. 4XNBHUoBOEUKnTHe
    4XNBHUoBOEUKnTHe
    fFirnes2hIApx6RL

    • Before beginning repairs, disconnect and remove all hoses.

    • Flip the motor ignition switch into the OFF position.

  2. nsccBgKEm5OItKQB

    • Use a 13 mm socket to remove the two bolts securing the handle.

  3. Kc5PVPsR2E6HAM1A
    Kc5PVPsR2E6HAM1A
    FjoO3XIx2eHIBc2U

    • Remove the handle.

  4. XiFThMtwfiSUnIil

    • Use a 13 mm socket to remove the two bolts securing the float chamber housing.

  5. 1OmpjeiKGZUJgeZW
    1OmpjeiKGZUJgeZW
    22VMyR5K2dUn1iR2
    1ZN1mtUKDGTd4iib

    • Remove the float chamber housing.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Carsten Frauenheim

Mitglied seit: 10/03/20

88317 Reputation

0 Kommentare