Einleitung
In this guide you will learn how to replace the chip set in a Wahl Lithium Ion Trimmer.
-
-
Pry open the plastic cover into two separate pieces. The plastic is very durable so don't worry about breaking it upon prying it open.
-
-
-
Remove the old motherboard and install the new one. Then, connect the wires and white piece to the new motherboard.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
How do you take rubber piece off handle
Billy Joe Furr -
It appears the friction of your skin against the rubber grip can pull it down from the top enough that you can see how to peel it off.
Matt Benson -
How do you remove the rubber grip??
octavia197424 -
I have no rubber piece to remove
Charlie changed her kelly -
Pardon the analogy,
… but it's on there a little bit like a condom.
Start at the Top of the trimmer.
Use your fingernail to pry back the lip of the rubber.
Then start rolling it down the handle.
Toward the end you may just have to brute force - shove it off.
Mark Wingerd -
Check the model number. Mine looks exactly like the one pictured here.
Again, my trimmer model 9854L has the battery soldered in place. So, unless you have a soldering gun and tools, or want to buy one and do this job, don’t bother with the rest of the steps here as this is required for battery replacement.
Janek Kuchmistrz -