Waring Pro SB30 Back Panel Replacement

Geschrieben von: Sun Fai Lau
  • Kommentare: 0
Waring Pro SB30 Back Panel Replacement

Schwierigkeitsgrad

Easy

Schritte

3

Zeitaufwand

10 Minuten

Einleitung

The back panel located on the underside of the burner and is held in place by multiple screws. Take care when removing the screws as it may require a good amount of force if the panel has never been removed.

  1. DZTFyhcSDb4LUUbi

    • Remove the screws on the back panel with the #1 Phillips screwdriver bit.

    • The screws in the rubber legs of the burner do not need to be removed.

    • If the back panel has never been opened before, the screws may be more difficult to unscrew.

  2. OLTcFLHSgcfRI4Bk
    OLTcFLHSgcfRI4Bk
    iDFyIR4ufW3PsbdD

    • Using a wrench, remove the bolt from the center of the back panel.

  3. JwOLgrss4YW1sSgY

    • The back panel can now be easily lifted off.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Sun Fai Lau

Mitglied seit: 22/09/14

588 Reputation

0 Kommentare