Einleitung
This is a guide on removing the light bulbs from their colored-plastic shell, but not replacing the bulb. Take care not to use too much force as the bulbs or wires may get damaged while being extracted.
-
-
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
-
The screws in the rubber legs of the burner do not need to be removed.
-
-
-
Using two thin screwdrivers (or similar objects) wedge them into the slots of the plastic shell of the desired light.
-
-
-
Push the screwdrivers inward and guide the bulb outwards.
-
Gently grab by the wires and remove bulb from plastic shell.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
